Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Mission District, CA | Citadel Locksmith
We service, rekey, and install Schlage hardware across Schlage in San Francisco as an independent locksmith, not a manufacturer-authorized shop. What makes our Schlage work different here is simple: we understand how the Mission’s salt fog and first-Saturday rent-controlled turnover cycle actually damage and demand from your locks. If you need a Schlage lock rekeyed, repaired, or replaced in 94110, call (833) 589-8078 and you’ll reach Roland Vásquez’s team at Citadel Locksmith.
Why Mission District Residents Choose Us for Schlage Service
Schlage has been on Mission District doors for generations. The B60N deadbolt is practically standard hardware on the neighborhood’s Edwardian and Victorian flats, and the original brass mortise locksets from the 1920s are still turning keys in hundreds of buildings between Valencia and Mission Street. We know these locks because we work on them every week. Roland Vásquez grew up in the Excelsior District, where his uncle ran a small hardware shop near Mission Street and first handed him a set of picks at age fourteen. After City College’s locksmithing program, he spent the better part of three decades working San Francisco’s neighborhoods, and the Mission’s particular mix of old brass and new keypads is something he can assess in about five minutes.
We carry genuine Schlage OEM cylinders and rebuild kits for the B60N and F-Series lines, plus quality aftermarket pins and strikes where OEM isn’t available. If you manage a multi-unit building or just moved into a rent-controlled flat, we can rekey every Schlage lock on your door, set up a master-key system, or swap corroded hardware for brass or marine-grade that holds up to the fog. You can browse our Schlage sales & service page for the full range of what we handle.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Mission District
- Salt-fog seized B60N cylinders on street-facing doors. The fog rolls in from the west and keeps the Mission damp year-round. Ground-floor entries facing open west collect salt air on the cylinder face, the pins gum up, and the key grinds or stops turning entirely. We disassemble, clean, and rebuild, or replace with brass-bodied hardware when the corrosion has gone too deep.
- Painted-over cylinder faces on original mortise and Schlage sets. Decades of repainting in 1906-1930s flats glues the cylinder face and trim. The key won’t seat until the paint is cleared, and forcing it just bends or breaks the key. We clear the paint, restore the cylinder, and get you turning again.
- Deadbolts that won’t throw on settling frames. A century of movement means Mission door frames warp and settle. The Schlage deadbolt is fine, but the bolt hits the strike plate wrong and won’t extend. We shim the strike or plane the door face so the deadbolt throws clean. This is one of the most common calls we get in Victorians that haven’t been squared since the 1930s.
- Zinc-bodied hardware pitting from coastal damp. Cheap zinc lock bodies corrode fast in the Mission’s salt air. We see Schlage knockoffs and low-grade aftermarket bodies pitting on exposed doors where brass or marine-grade would have lasted decades. We recommend replacement over repeated rekeys when the body itself is failing.
- Master-key systems needed for shared Victorians. When a three-unit Edwardian turns over tenants, the landlord needs one key for the front entry and each tenant holding only their own unit key. We build master-keyed Schlage systems so a departing tenant never walks off with access to a neighbor’s apartment.
Schlage Service in Mission District: What Local Conditions Mean for Your Equipment
The Mission’s rent-controlled flats almost all turn over on the first Saturday of the month. That single day is when we rekey whole buildings, often three units in the same Victorian on one block. Landlords call us days ahead to schedule, because they know the movers are coming regardless of the locks. For Schlage owners, this calendar quirk matters: if your B60N cylinder has been sitting in fog for a decade and a departing tenant finally returns their key, that first-Saturday job is when you find out whether the cylinder still turns. We set up master-key systems on those turnovers so the landlord holds one key and each tenant only their own. On a first-Saturday turnover off Valencia, we rekeyed three units in one Edwardian flat: a painted-over B60N on the street door that wouldn’t take the key until we cleared the cylinder face, plus two interior deadbolts on settling frames that needed strikes shimmed before they’d throw. We rekeyed rather than replaced the original brass mortise in the front entry, set the master-key system, and explained rekey versus replacement in Spanish to the incoming tenant. Everything was done before the movers finished unloading.
Roland puts it plainly: “A lock is only as strong as the decision behind it.” When we recommend brass over zinc on a fog-exposed Mission District door, that’s the decision we’re talking about.
Schlage Models & Products We Service in Mission District
We work on the Schlage lines this neighborhood actually runs. The B60N single cylinder deadbolt is the workhorse; the F-Series knobs and levers (F51/F10) cover most interior doors. Camelot and Plymouth handlesets appear on restored Victorians, and the BE365 and BE469 keypad deadbolts show up increasingly on ground-floor units where tenants want code entry. Behind many of these sit original brass mortise locksets with skeleton keys, still in service after a century. Our parts approach stays consistent: genuine Schlage OEM cylinders and rebuild kits for B60N and F-Series, quality aftermarket pins and strikes only where OEM isn’t available. When a cylinder is corroded beyond cleaning or a zinc body is pitting, we recommend replacement with brass or marine-grade on fog-exposed doors. We’d rather tell you that once than rekey a dying lock twice.
Schlage Service Pricing in Mission District
Schlage rekeying in the Mission typically runs $25 to $45 per cylinder when we’re already on site, with a trip charge of $65 to $100 depending on where in 94110 you are and whether it’s a weekend call. Complete Schlage deadbolt replacement usually lands between $120 and $200 for the lock plus labor. Keypad models like the BE365 run higher, generally $200 to $300 installed. Master-key system design and setup is quoted per building and depends on cylinder count. What drives cost here: the age of the lock, fog corrosion levels, and whether door frames need planing or strike shimming. The free phone estimate includes the trip charge, the per-cylinder cost, and any labor for frame adjustments, so you know the full number before anyone rolls out. Call (833) 589-8078 for an exact quote, and that’s the price on the invoice when we arrive.
Serving Mission District, CA — Our Local Coverage Area
We’re based in the Mission District area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Mission District
No. We’re an independent Schlage service provider. We work on Schlage hardware every week, and because we’re independent, we can tell you honestly when a cylinder just needs a rekey and when the lock body itself has corroded past saving, without a brand quota to hit.
Yes, we stock genuine Schlage OEM cylinders and rebuild kits for the B60N and F-Series lines. We use quality aftermarket pins and strikes only where OEM isn’t available or where the door conditions in the Mission call for a specific fit.
Most rekeys and deadbolt replacements are done same-day, often within a few hours of your call. Weekend first-Saturday turnover days book up fastest, so scheduling ahead is smart. Call (833) 589-8078 with your cross street and we’ll give you a realistic window.
We service the B60N single cylinder deadbolt, F-Series knobs and levers, Camelot and Plymouth handlesets, BE365 and BE469 keypad deadbolts, and original brass mortise locksets with skeleton keys in older buildings.
An on-site rekey typically runs $25 to $45 per cylinder plus a $65 to $100 trip charge. Full deadbolt replacement is usually $120 to $200 including labor, depending on what’s on the door and what the fog has done to it. We quote the full price on the phone before anyone is dispatched, and that’s the price on the invoice. Call (833) 589-8078 for an exact number, estimates are free.
Service Areas Near Mission District
We also run Schlage service calls into the neighborhoods around the Mission. If you’re over the hill in Noe Valley, see our Schlage service in Noe Valley page. North of Market, we cover Schlage service in Chinatown for older multi-unit buildings there. Our full Mission District service area page covers the rest of 94110 and the surrounding blocks.
Book Your Schlage Service in Mission District Today
If your Schlage deadbolt won’t throw, your key won’t turn in a fog-seized cylinder, or you’re taking over a unit on the first Saturday of the month and need locks changed fast, call (833) 589-8078. Same-day service is available for most Mission District Emergency Locksmith calls, and the quote we give you on the phone is the price you’ll see on the invoice.
Written by Roland Vásquez, Owner at Citadel Locksmith, serving Mission District since he first started rekeying San Francisco’s Victorian flats.